Heavy-Duty Linear-Motion Isolation for Extreme Depths.
A heavy-duty linear-motion isolation valve engineered specifically for underwater installation on offshore oil/gas fields, subsea manifolds, pipelines, wellheads, and flowlines. Rated from 2,000 to 20,000 psi (138–1,380 bar) and operating at depths of 3,000+ metres (10,000 ft).
A subsea gate valve is a heavy-duty, linear-motion isolation valve designed specifically for installation and operation underwater — typically on offshore oil/gas fields, subsea manifolds, pipelines, wellheads, and flowlines.
It controls the start/stop flow of oil, gas, or produced water by raising or lowering a solid "gate" (disc) into the flow path. It is engineered strictly for positive isolation — fully open or fully closed — and not for throttling.
In the open position, the gate is fully retracted and the bore is completely clear, creating minimal flow resistance. In the closed position, the gate seats firmly against precision-engineered seals for positive shut-off and zero hydrocarbon leakage into the surrounding ocean.
Designed for 20+ years of maintenance-free operation in hostile marine environments where retrieval for repair is difficult or impossible. Every valve is engineered to withstand extreme internal process pressure combined with crushing external hydrostatic pressure.
Open position: Gate is fully retracted; bore is completely clear with minimal flow resistance. Closed position: Gate seats firmly against metal-to-metal seals for positive, zero-leak shut-off. Not used for partial flow to avoid high-velocity cavitation damage.
Safely separates pipeline sections, subsea manifolds, flowlines, and subsea Christmas tree branches for operational maintenance, testing, and system integrity management.
Failsafe rapid closure during abnormal pressure, pipeline rupture, or unexpected subsea process emergencies to isolate wells and protect offshore assets and the environment.
Isolate individual production wells, injection branches, or trunk line connections within complex subsea architecture with full multi-phase fluid compatibility.
Ultra-tight metal-to-metal and resilient elastomeric barrier seals ensure complete process containment, preventing hydrocarbon discharge into the ocean under severe pressure differentials.
Heavy-duty construction, specialized metallurgy, and cathodic protection compatibility ensure 20+ years of maintenance-free subsea lifecycle without intervention.
| Parameter / Specification | Engineering Details & Performance Rating |
|---|---|
| Valve Type | Heavy-duty linear-motion slab / expanding gate isolation valve |
| Operation Mode | Full-open / full-closed (positive shut-off; not for throttling) |
| Pressure Rating | 2,000 psi to 20,000 psi (138 – 1,380 bar) — tailored for extreme deepwater hydrostatic & internal process pressure |
| Water Depth Rating | Shallow water to 3,000+ metres (10,000+ ft) deep |
| Bore Sizes | Standard sizes from 2" up to 16"+ (custom bore configurations available) |
| Body Metallurgy | High-strength carbon steel, alloy steel, duplex stainless steel (22Cr), super duplex stainless steel (25Cr), or nickel alloys (Inconel 625/718) |
| Internal Hardfacing | Stellite or tungsten carbide cladded / hardfaced gate and seats for maximum erosion, wear and galling resistance |
| Sealing Architecture | Bi-directional metal-to-metal primary seals with secondary elastomer / thermoplastic backup seals; zero-leakage shut-off |
| Actuation Options |
|
| End Connections | API flanged, compact flange, clamp hub, or direct welded ends engineered for subsea tie-in systems |
| Process Fluids | Crude oil, wet/dry natural gas, multi-phase fluid, produced water, chemical injection, sour service |
| Corrosion Resistance & Standards | NACE MR0175 / ISO 15156 compliant; corrosion-resistant cladding; external marine epoxy / yellow polyurethane anti-fouling coating |
| Design Standards | API Spec 6A / 17D (Subsea Wellhead and Tree Equipment), API 6AV1, ISO 13628-4, NORSOK standards |
| Design Lifespan | 20+ years continuous subsea operation without retrieval |
| Price & Availability |
|
The industry standard for subsea Christmas trees and manifold control. Features failsafe spring-return or double-acting hydraulic cylinders powered via subsea electro-hydraulic control pods (SCMs) and subsea umbilical bundles.
Next-generation all-electric subsea actuation provides precise gate positioning, eliminates hydraulic fluid discharge risks into marine environments, reduces umbilical size, and delivers real-time diagnostic telemetry.
Equipped with standard ISO 13628-8 / API 17D Class 4 or 5 ROV torque tool buckets and visual position indicators. Enables remote subsea vehicles to mechanically open, close, or override the valve without diver intervention.
Contact our subsea engineering specialists for technical documentation, custom pressure ratings, alloy selection, and API 17D / ISO qualification data.
contact our team